Skip to content →

Date archive for: September 2015

Health Complications Associated With Driving

Spine ache is one of the most frequent reasons for visiting the doctor, the reason provided for nearly 50 million sick days a year. Surprisingly, the most common cause for the ailment is long hours of driving. A little known fact is that, of the waking hours in a working adult’s day, the majority of their time is spent at the office and surprisingly next in line, is their vehicle. We fail to realize just how much time we actually spend traveling to work, from work, to meetings and from meetings.

Although often unobserved, between office rush traffic and out of town meetings, the hours that you spend in your car can be very long. However, the car seats most cars are equipped with on purchase are not generally designed for drivers to be seated for long periods of time daily. Sitting in your car for a lengthy amount of time places certain stress on the spine causing numerous spine and back problems that may remain unobserved, making themselves known later on in life. Basic car seats provide little to no allowance for moving your body and is often a burden on one side of the spinal column.

How to avoid spinal pain caused by driving

To avoid painful spine pain prompted by using improper car seats it is advisable to purchase aftermarket car seats. While it may be an additional cost, you should consider the purchase an investment in your own health. Spending a few hundred dollars today is far better an investment that having to spend thousands in medical expenses in later years

The aftermarket car seats available today in the market are designed with years of experience, providing safety, quality and comfort. Providing you with the choice of selecting a seat to suit your budget, ranging from basic to super luxury, these seats will provide your body the support it needs under any driving state. Further, the seat will also provide you with sufficient safety in the event of a road accident. Here are more information regarding aftermarket car seats on this link http://www.techsafeseating.com.au/suv-wagon-seating.

While purchasing special seating for your car will provide your spine with adequate protection, it may not guarantee you a one hundred percent shield from ailments. It is advisable, whenever possible, to deviate from driving. You could take the bus or subway to work once in a while, maybe take a cab to that out of town meeting. If probable, encourage your kids to group up and take a walk to school together. Not only will this lower the risk of spinal disorders even further, but will also reduce mental stress and is better for the environment.

Comments closed

Specialists in Camper Conversion (VW)

 

There are a number of companies providing camper conversion service for VW transporter. Whether you want a new Camper (VW) or would like to convert an existing van or want accessories supplied, these companies provide the best services.

They guarantee each part is certified and is authentic and completely suitable for the vehicle you are planning to use. Such companies keep updating themselves by testing all sorts of new products available in the market. Everything that they design is user friendly and proper utilization of space. They are also ready to guide you if you are converting your van into a bus; these firms guide you and ensure that your requirements are met at a cost-effective price.

The campervans available in the market are multipurpose and VW transporter motorhome is impressive and come with great features too. Some of the standard features are sink comes with an electric pump, plywood cupboards, fridge freezer, table, stove, water tank, auto charging battery, etc., the campervan provides safety, comfort and good for everyday use too.

The size if campervan is ideal for country lanes with narrow in size and double bed which can be converted from a seat to a bed. It also provides a room for the second person to sleep. It is insulated completely and comes with a heater blower, which help you in giving warmth all throughout the year. The campervan also consist of gas burner to adjust to your cooking needs along with a fridge and a sink that has both hot and cold water facilities. For your safety the campervan also consist of first-aid box, fire extinguisher, smoke alarm, alarm for carbon monoxide gas and fire blanket. Smaller models also have portable toilets, external shower and water heater.

Some people who own campervan register with hire agency dealing in renting out campervans, so that they can use it as a source of income. Volkswagen motor home or campervans has really good models. Some of them have the capacity for four to five people to be seated, rock and roll beds, having water and electrical supply, full length top roof for the bed which is suitable for adults. The hiring agencies offer the best models to suit your traveling needs or you can get conversions made to suit your needs.
The campervans or motor homes are built with all amenities to make your journey comfortable and safe. Some of the campervans are pet friendly too, so you do not have to worry about carrying your pets along with you and enjoy the journey to the fullest. Even in winters you will not feel you are away from the comfort of your house as the campervans are heated properly for winters.

 

 

Comments closed

For Show Or For Go

People want to buy four wheelers that can suit their personality. But some look for a four wheeler to fulfill the needs while others go for two purposes: style and personal leisure. The one who wants to go for the show purpose tend to buy expensive four wheelers and the ones who just want to fulfill their needs and desire of getting four wheelers goes for the regular ones. It is necessary to divide the requirement of buying a four wheeler or else one can be in soup if he or she cannot maintain it later on.
What about expensive four wheelers?
The expensive four wheelers are the ones that we call the luxurious four wheelers. Everything about the expensive four wheelers is that it has come in a classic style that blows away the mind of people. It has powerful engines and with a most expensive interior design that will make one comfortable and boosts up for driving. But maintaining luxurious four wheelers is bit difficult. If by any chance it gets scratches then the repairing expenses rise up. One needs to always be in touch with the mobile car detailers because sometimes it is risky in sending the four wheelers to the washing company as it may end up with a bad servicing.
How fun is to have a normal vehicle?
Many people think that having an expensive four wheeler and experiencing the moment would have been wonderful. But maintaining a luxurious four wheelers is like feeding an elephant every day. If one buys a normal vehicle, then he or she can maintain it easily as there would be no headache and tension of having an expensive four wheelers. One can modify it and make it as he or she wants the four wheelers to be or even one could customize it. 

Easy maintaining
One, who has four wheeler, can easily maintain it. If one does not want to go to the four wheelers wash company or does not have any time, then do not worry. You can always call the mobile auto detailers at your place. They will come all the way and clean the four wheelers in no time and make it look fresh. They help you in saving time instead of wasting it after a car. The detailer brings all the equipment along with them to give full cleaning service to the car. They may sometime charge high or even less, depending on the place he/she has to travel for.
Conclusion
Buying a car is a good thing, but maintaining it is what you need to focus upon. All types of car should be maintained as it gives a good charm and reveals the personality of the owner.

Comments closed

When You Are Tired Of All The Junk In Your Yard, Trade It For Cash

Some people have penchant to keep things even if these things make them look untidy. That is what happens to some car owner. If they are lucky to have space in their house, they will keep every car they have owned for as long as possible. Before long their yard looks like a garage for junk cars. The thing is if you asked this people to get rid of these junk cars, they wouldn’t.

However, since money make the world go round, tell them about the possibility of making a lot of money from all the junk and they will be on the phone calling companies that are ready to hand unwanted car removal in Melbourne. For those with a lot of junk material that comes in metals, there are a lot of opportunities to turn all that junk into some ready cash. There a lot of websites that handle metal recycling that will be happy to come in and remove the junk. There are also scrap metal dealers as well as those who deal in used cars.

Contact a car recycling dealers online

The internet has made life easy for all of us. Today you don’t have to move an inch to get what you want. If you have finally decide to get rid of all the junk in your yard, all you may need to do is to get online and start searching for companies that deal in metal recycling. Contact different companies on what you have to offer. You can be sure at least on one two will get back to you with an offer. If you are happy with their offer, you can ask them to come in and do the removal.

Contact a scrap metal dealer

Even if you can’t find a recycling company, you can start lower in the chain by looking for a dealer in scrap metals. These are the ones that actually work closely with recycling companies. You stand a better chance of getting a deal with a scrap metal than with a recycling company. However, you may end up getting less for your metal

Contact a used car dealer

I f you just can’t be bothered with the time and stress involved in sourcing for recycling companies or scrap metal dealers, you best bet is to contact local dealer in used cars. They may be happy to buy directly from you since they have the right network to be able to resell the scrap. These dealers are lower in the chain so you should expect to get less if you sell at this level.

Whatever means you use to get rid of the junk in your yard, you will be happy you did not only for the cash that came with it, but also for the new look your yard will get with all that junk gone.

Comments closed

Panel Beating: Why It Works And When?

Car repairers are not actually repairing the damaged parts these days; they are simply replacing them. Traditional ways of repairing the car are still the way to get the car back to track. Repairers say the panel beating way of repairing the damaged car part is very much time consuming and labor intensive. Replacing the part turns out to be faster and economic way of doing the job. Moreover, the design of the spare parts is also too complicated to find out the correct way of fixing it.
Design of the car has undergone a sort of revolution since 1920. Those days, the parts were mostly made of simple curves and were made of such materials, for example, sheet-metal panels, wooden panels etc, which could withstand the beating and reframing process quite easily. Traditional panel beaters in Hallam are now thrown up a challenge of dealing with intricately welded stainless steel or metallic material which is certainly not so easy to beat and reform.
Very few repairers in Australia are still using the age old ways of panel beating for repairing the smashed car parts. Panel beating is of great importance when a car is in prototype stage. Several prototypes are designed before zeroing in on the perfect one. So, if the person facing the damage of smashed car is looking for the correct solution, he may refer to panel beaters who have been active in the preparation of prototypes. They are thorough with the framework and may provide best solution.
Prototypes of the car are mass-produced. Panel beating experts are provided with the designs, layouts and drawings to understand the shape and thickness of the metal sheet, which is planned to be employed for making the car. He, then, performs the beating process and makes the desired component the way producer has planned. 

When panel beating is feasible?
The material used for making the car decides whether the panel beating is the possibility or not. Malleability of a metal makes the panel beating possible. Since lot of hammering goes into traditional panel beating, the metal should be malleable enough to withstand the hits. Therefore, car when made with materials such as aluminum and stainless steel can be repaired by the way of panel beating.
So, panel beating is the traditional way of repairing the damaged car and does have lots to offer to the owner of the car such as longevity and the sturdiness of the repair. The use of various traditional tools such as hammers, dollies and rivets can help you adopt DIY procedures which you must try before queuing at the car repairs and maintenance center. Panel beating is a timeless method of car repair and is quite feasible if you are thorough with tools and equipments.

Comments closed